Solid State Wiring Harness - New Products

Solid State Wiring Harness
The Littelfuse ISIS Intelligent Multiplexing System is a solid-state electrical system that eliminates tangles of wire, slashes install time in half, and gives auto enthusiasts complete control over their cars' accessories in ways that are limited only by their imaginations. It is the first multiplex system to make OEM technology available to any car, whether street rod, resto-rod, off-roader, kit car build, tuner, muscle car, or quarter-miler. ISIS changes the process of wiring a vehicle by employing a plug-and-play modular design identical to that used in OEM vehicles. Multiplexing uses computerized power distribution to reduce the amount of wiring and to increase performance. For more information, visit the Littelfuse ISIS website at www.isispower.com/pr1.

Non-Adjustable Coilover Shocks
For the budget-minded car builder, Aldan Eagle Shock Absorber Company introduces non-adjustable coilover shocks. Comprised of billet aluminum, the shocks are available with over 17 different spring rates, have a billet finish, and can be ordered in three different lengths. For more information, contact Aldan Eagle Shock Absorber Company, 310/834-7478, or visit www.aldaneaglecom.

Roush/Superformance SpecialEdition MKIII-R
The Roush/Superformance Special Edition MKIII-R was built specifically to tour the country and represent the bread and butter of what Roush Performance Engines and Superformance LLC have to offer. The plan was to build a one off display vehicle, but the project's high interest quickly changed everyone's mind and suddenly the car was slated for production. The Special Edition car was introduced to the public at the SEMA show in Las Vegas, Nevada. The MKIII-R showed the public what it has always wanted to see-two industry leaders working together to produce the best of both worlds. For more information contact Superformance LLC, 800/297-6253, www.superformance.com, Roush Performance Engines, 800/59-ROUSH, www.roushperformance.com, Hillbank Motor Corporation, 888/445-5226, www.hillbankmotorsports.com, or Exotic Auto Restoration, 714/979-7100, www.carsbyexotic.com.

Edelbrock RPM Xtreme S/B Ford Cylinder Heads
Edelbrock RPM Xtreme series cylinder heads for S/B Ford, #51259, are CNC-ported where it counts for maximum air-flow and ultimate performance. Engineered and manufactured using the best combination of as-cast port design and CNC technology, RPM Xtreme heads are CNC-ported in the critical areas (combustion chambers, intake entry, exhaust exit and intake/exhaust bowls) for improved airflow and overall performance. RPM Xtreme heads are ideal for high-performance street and entry-level race applications. These heads are sold complete with high-quality conical (beehive) springs, 8mm stem stainless steel valves, and include heli-coil inserts in the exhaust flange and rocker stud bosses. For more information, contact Edelbrock Corporation, 310/991-7744, or visit www.edelbrock.com.

Twin Throttle Body Fuel Injection Kit
Engines have to breathe. Like a carburetor for fuel-injected engines, the throttle body controls the amount of air flowing into the engine in response to driver input. Howell Twin Throttle Body Fuel Injection Kits improve starting and drivability with noticeable power gains and gas mileage improvement with better air flow control and higher volume capacity. Controlled by a production based GM ECU, this system will provide improved performance and drivability, as well as improving closed loop fuel economy. The system is designed for use on twin four-barrel intake manifolds with 6.5-inch carb spacing. It is optimized for use on small and large displacement V-8's, and is compatible with electronic and mechanical distributors. For more information, contact Howell Engine Development, 810/765-5100, or visit www.howell-efi.com.

Economical TIG Welder
HTP America, Inc. announces the Invertig 160DC-an affordable, full-featured TIG welder capable of welding steel and stainless steel 4130 chrome moly tubing, as well as other ferrous materials. The Invertig 160 is easy to operate. Arc adjustment is located on the front of the welder or remotely with the optional foot pedal or torch mounted amperage control. Slope down, final current, and post gas flow are all standard, as is a pulser that allows the operator to DC pulse TIG from 0.5Hz to 300Hz. The new Invertig 160DC welds up to 5/16-inch steel, weighs only 32 lbs and measures just 16-inch long x 12 1/2inch wide x 8-inch high, allowing this versatile machine to be brought to any fabrication site. In addition, it operates on 110 or 220 volts so it can be plugged into most electrical outlets and used anywhere. For more information, contact HTP America, Inc. 800/872-9353, or visit www.usaweld.com.