FFR Daytona Type 65 Gets Paint & Body Work- Type 65 Earns Her Stripes
|
The bodywork must be finished with 180-grit or better sandpaper. Spray three to five coats of Valspar DTM2000 primer/sealer over the entire car. If painting inside the hood of the car, bodywork and primer must be done as you would the outside. Use a Flex additive in all materials you spray. After primered, let the primer dry for one week or so, allowing it to sit in the sun as much as possible. Wet sand the car with 400-grit sandpaper, blocking areas where needed. Fill in minor imperfections and pinholes. View Related Article
|
|