SCOGGIN DICKEY
Our ZZ4/355 crate engine is a ZZ4 350 crate motor from GM Performance Parts that produces 355 hp out of a small-block, aluminum-head engine! With 405 lb-ft of torque, the ZZ4 is the best way to put a high-performance small-block engine under your hood! The specs on this motor are 355 hp at 5,250 rpm with 405 lb-ft of torque at 3,500 rpm. It is set up with a compression ratio of 10:1, and uses a cast-iron four-bolt main; a 4-inch bore; a forged-steel, 3.480-inch stroke crankshaft; aluminum heads with 58cc chambers; and a 1.940/1.500-inch valve combo. The cam is a hydraulic roller and the intake in an aluminum dual-plane unit. This crate engine (PN 24502609) is sold for $3,788.99.
Scoggin Dickey
5901 Spur 327, Dept. KC
Lubbock, TX 79424-2705
(800) 456-0211
www.SDPC2000.com
SHAFIROFF RACING
In this high-tech world, a "one-size-fits-all" crate engine couldn't possibly cover all the different applications on the street today. Your high-performance street car needs an engine specifically designed for your intended usage. Whatever your end goal is, you can have a Shafiroff Ultra Street engine custom-built for you at a crate engine price! This new Ultra Street line of high-performance street engines achieves the two goals all street car enthusiasts strive for: power and reliability! Offered in Standard, Extended Cruising, and the "Saturday Night " special, these packages give you three levels of performance, along with specific component upgrades to perfectly tailor the engine to your application, at an unbeatable price! Motors start at $8,295 and go up from there as various options and versions are available.
Shafiroff Racing
35 Davinci Dr., Dept. KC
Bohemia, NY 11716
(800) 295-7142
www.shafiroff.com
SMEDING PERFORMANCE
Our Ford 392 stroker produces 460 hp and 450 lb-ft of torque using 100 percent brand-new parts. We start with a Ford SVO Sportsman block with a one-piece rear main seal and add forged-steel rods, ARP rod bolts, K.B. pistons, a hydraulic roller camshaft, full roller rockers, 2.02 aluminum heads, and an air-gap intake manifold. The assembly is precision-balanced, dyno-tested, and tuned, and comes with a two-year limited warranty for $6,895 (with free shipping in 48 states).
TURN KEY ENGINE SUPPLY
Get ready for power and torque unlike anything you've ever experienced before with the new Turn Key Engine Supply 700hp supercharged and intercooled LS2 SuperStreet Engine. Created especially for musclecars, street rods, and custom trucks, this engine features hard-core performance parts including a forged crank, rods, and pistons, along with an iron cylinder block for additional strength under maximum boost. Air Flow Research aluminum cylinder heads provide unmatched breathing, and are complemented by a Kenne Bell 2.4L Blowzilla twin-screw supercharger and intercooler. The result is unparalleled power and torque from 2,000 rpm all the way to redline. Turn Key Engine Supply is the industry leader in custom LS1, LS2, LS6, and Ecotec crate engines. Each features their patented 5-Wire Plug And Play Harness, which includes a state-of-the-art Delphi ECM with a Turn Key precision-engineered calibration. The result is easy installation matched with incredible performance. Turn Key Engine Supply offers a comprehensive selection of engine packages from mild to wild, and can also build an engine designed especially for your needs.
Turn Key Engine Supply
2620 Temple Heights Dr., Unit B, Dept. KC
Oceanside, CA 92056
(760) 941-2741
www.turnkeyengine.com
TURN KEY ENGINE SUPPLY
Turn Key Engine supply is introducing the brand new LS2 crate engine into their lineup of crate engines. The LS2 all-aluminum 6.0L is capable of 515 hp and 490 lb-ft of torque, bone-stock on pump gas. All Turn Key packages including the LS2 comes complete with a custom marine-grade engine-wiring harness, a serpentine belt system, a Delphi ECM with Turn Key Calibration, a fast throttle body, 90mm Complete Ignition (coil packs, wires, and plugs), an exhaust manifold, all necessary sensors, block-offs, a K & N air filter, an alternator, a water pump, a starter, a flywheel or flex plate, engine oil and filter, a fuel pump kit with fuel pressure regulator, AN-fitted fuel rails, and an installation guide for the 5-Wire hookup. The LS2 street packages start at $10,000 with upgrades available. Turn Key also sells a variety of Gen III packages, stock LS1 410 HP for $7,600. The stock LS6, which produces 460 hp, goes for $8,800.
Turn Key Engine Supply
2620 Temple Heights Dr., Unit B, Dept. KC
Oceanside, CA 92056
(760) 941-2741
www.turnkeyengine.com
WORLD PRODUCTS
Looking to combine serious muscle with outstanding reliability? By using its highly refined new "Man O' War" replacement block for Ford 302/351 applications as the foundation, World Products offers crate engines with 427- and 460ci displacements that are not burdened with the additional weight of the FE big-block. World's "Hardcore" 427-inch small-block cranks out 500 hp with iron heads, and 525 with aluminum heads. The engines come fully dyno-tested, are backed with a 24-month warranty, and cost under $10,000. Add $1,000 and you can step up to the humongous 460ci "Limited Edition" version that delivers huge torque and 575 horses on pump gas. It's also individually assembled in a race shop environment, dyno-certified to meet or exceed published performance specs, and backed with a 24-month warranty. Call Bill Mitchell Hardcore Racing Products at (631) 737-0372 for info.
SMEDING PERFORMANCE
Our Chevy 383 Extreme engine produces 450 hpand 460 lb-ft of torque using 100 percent brand-new parts. We start with a four-bolt main block with a one-piece rear main seal and add forged-steel rods, forged steel crank, ARP rod bolts, coated pistons, a hydraulic roller camshaft, full roller rockers, 2.02 aluminum heads, and an air-gap intake manifold. The assembly is precision-balanced, dyno-tested, and tuned, and comes with a two-year limited warranty for $5,895 (with free shipping in 48 states).