Kit Car Homepage Kit Car

Installing A Fuel Cell In Older Kits

We used a flare nut wrench to tighten down this adapter to the outlet on the fuel cell. This wrench spreads out the load on the fitting to allow more accurate tightening. The ATL cell comes with a -8 (1/2-inch) AN outlet fitting, and we needed this adapter to come down to a -6 (3/8-inch) fitting.
Installing A Fuel Cell - Cell Science

 We used a flare nut wrench to tighten down this adapter to the outlet on the fuel cell. This wrench spreads out the load on the fitting to allow more accurate tightening. The ATL cell comes with a -8 (1/2-inch) AN outlet fitting, and we needed this adapter to come down to a -6 (3/8-inch) fitting.  View Related Article

 

Get Adobe Flash player

Car Research Guide