Installing A Fuel Cell - Cell Science
|
You could plumb your system with all AN fittings (aero fittings popular on racing cars), but that would look too modern for our resto-racer. We chose to go with high-quality hose and conventional fittings. Since we're using a relatively mild engine (360-horse 283 Chevy), we can get away with a 3/8-inch fuel line. Monster motors should use 1/2-inch line. To attach the aluminum line to the rubber hose, it must be beaded to prevent the hoses from pulling off. Here, an Earl's Performance 3/8-inch beading tool is slipped in the end of the tubing. View Related Article
|
|