The phrase "Replication With Innovation" is pretty snappy, but it's the perfect way to describe Cutting Edge Replicas in Manteca, squarely in the middle of California. The family tree in the kit car market sometimes resembles a telephone pole-straight and without any deviation. What Cutting Edge Replicas is doing is living up to their innovative tag line and producing a product you recognize--a Cobra roadster hybrid--but with a very interesting chassis to support it.
It's also interesting to note that CER is a hybrid, too, growing out of the needs of three people--a pair of brothers and a self-admitted Cobra nut. Back in 1984, Kurt and Doug Franklin started DKW Precision Machining with their father, a company that fabricates billet steel and aluminum parts for the U.S. government and the aerospace industry.
The shop covers 14,000 square feet, and their experience with design and engineering of precision-made parts has given them an edge over the typical guy wanting to build Cobra parts. Each of them with over 20 years of know-how allows Kurt and Doug to analyze a product to the nth degree before production begins, following the product through to its completion, too.
The other person in this tri-level equation is Jim Riddell. After building Cobra kits for more than 10 years, he knew his way around them pretty well and felt he could design and build one that would be superior to any other that was on the market. And having raced midgets and sprint cars gave him the insight on what it would take to make a part that would hold up under stress as well as perform well, too. After designing some suspension parts, Jim looked around to find the right company with the right credentials to make parts as meticulous as he would. An engine builder who knows both Jim and the Franklin brothers introduced the trio and they hit it off. The Franklins got so into what Jim wanted that they all decided to join forces and, since January of 2004, they've been working together collectively as Cutting Edge Replicas.
What would be surprising, even with fate dealing its hand in throwing these three together, was the fact that both Kurt and Doug wanted to build a Cobra for themselves! The timing of Jim's entrance couldn't have happened at a better time for all of them! Jim turned his aluminum A-arm suspension designs over to the brothers so they could get an accurate and well-made piece by taking advantage of the CNC machines at their disposal. Each part gets planned out and designed on the computer, 3-D drawings are made, and every prototype is studied again and again before the final product is milled.
Working with precision-made aluminum pieces has allowed Cutting Edge to create some of the most unique Cobra parts to come along in some time. Drawing from the world of sprint car racing, the double aluminum A-arm setup has done well in both racing and hot rodding, so why not in replicars? Add to that an inboard coilover shock design and you can see how the innovation CER talks about isn't just a logo. The icing on the cake? With all of this precision machinery around, why not make other parts, such as door hinges and engine brackets, out of billet aluminum, too?
With all these well-made suspension parts, you'd have to believe the standard CER chassis is anything but "standard." Riddell really went to town in redesigning what had gone before, incorporating his own design for the actuated inboard shock system as well as some beefy upgrades to their chassis. Jim found that some chassis designs he'd seen were insufficient when it came to critical strength areas, such as the front crossmember section that supports the vehicle's suspension. Looking more like a high-end hot rod than some of the spindly designs seen on some Cobra chassis, the CER chassis appears almost overbuilt--but we know that's not the case with the way some Cobra drivers will treat this car when it's finished!
Other areas of the chassis are reinforced with steel plate, such as the rear seating section (it adds structural rigidity to the frame as well as another point of safety). Jim does most of his work (chiefly all of the parts and chassis welding) off-site at a 4,200-square-foot shop located near the DKW location, and it's where the assembly of the vehicles takes place, too. And if you think these guys would let someone else design and build a Cobra body for the cars they sell, then you haven't been paying attention! The Cutting Edge replicar is a hand-laid 427 roadster and comes from their own molds with gel-coated inner door and trunk panels as well as a rolled edge around the cockpit.
Based at $27,950, the vehicle you get from Cutting Edge includes a chassis set up on a 90-inch wheelbase and made from 1020 steel tubing that was jig-welded before their indy suspension parts are attached. The front suspension is a double A-arm setup and fully adjustable for camber, castor, toe, ride height, and even spring rate. Out back, an 8.8-inch Ford rear center section is used with another set of inboard coilovers actuated via pushrods and rocker arms.
The Woodward rack and pinion steering system is new (not used) and Borgeson steering shafts and U-joints are used throughout. CER makes their own steering column, but likes to top it with a Moto-Lita wood-trimmed steering wheel. Each corner of the chassis features Wilwood disc brakes (13-inch up front, 11.5-inch out back). Inside, the cockpit comes with Auto Meter gauges (including a reverse-sweep speedo) as well as leather-covered bucket seats.
What you need to finish the car is the complete drivetrain including ignition, headers, transmission, rear gear section, wheels and tires, fuel system (though the chassis does come with a custom aluminum gas tank) and, of course, body and paintwork. What you won't get from Cutting Edge Replicas is a big run-around. The lead time for a chassis and body combo from CER is about two months and, unlike some manufacturers, they won't take a deposit until they're ready to build your chassis and body for you (and they don't ship partial or incomplete kits).
Though Cutting Edge Replicas has only been on the replicar map for a couple of years, it's easy to see when visiting the shop (which will be expanded by 7,400 square feet about the time you read this) or talking to these guys on the phone that they know what they're doing. They're committed to selling the best product they can make, and their enthusiasm is from knowing what is going to happen when you drive one of their cars, because they know once you drive one, you'll be hooked!

This is one of two buildings...

This is one of two buildings that house Cutting Edge Replicas. It's a 14,000-square-foot facility that contains all of the CNC machines and high-tech equipment CER utilizes to make their aluminum pieces. By the time you read this, they will have added another 7,400 square feet to the rear section of this building.

The trio that make up Cutting...

The trio that make up Cutting Edge Replicas includes Doug Franklin. They formed Cutting Edge in 2004 after realizing they all share the same goal of offering quality Cobra roadsters.

Cutting Edge Replica's Jim...

Cutting Edge Replica's Jim Riddell.

Cutting Edge Replica's Kurt...

Cutting Edge Replica's Kurt Franklin.

CAD (computer-added drawing)...

CAD (computer-added drawing) programs are used a great deal at CER, as the finished product can only be as good as the research that went into developing it.

Here are some of the CNC (computer...

Here are some of the CNC (computer numerically controlled) machines in place at the Manteca shop. When they're not being used to make CER's suspension pieces, they busy making parts for the aerospace industry and the U.S. government.

We've been to a lot of shops...

We've been to a lot of shops in our time, but we've never seen this tool in a car shop! A testament to the accuracy these guys surround themselves with is this optical comparitor that measures the pitch and thread of a bolt down to .001 of an inch. A small bolt can be seen in the lower right, while the portion of its thread pattern is seen on the screen in the upper left.

As a result of developing...

As a result of developing their own Cobra chassis design, Cutting Edge Replicas has designed and machined many parts from billet steel and aluminum. As precise as you want them to be, the CNC machines kick out CER's A-arms, rocker arms, bearing covers, brackets, and clamps with precision all day long.

While some manufacturers offer...

While some manufacturers offer a hinge made from welded tubing, Cutting Edge machines their own hinge from billet aluminum.

Cutting Edge's Jim Riddell...

Cutting Edge's Jim Riddell says they could have milled these A-arms down so they'd look sleeker, but that would go against the research that says they have to be this thick to be safe and work correctly.

Besides making their own chassis,...

Besides making their own chassis, Cutting Edge also makes their own birdcage (the extra tubing around the chassis), such as this beefy door brace, which fits between the inner and outer door skins.

The Cutting Edge chassis is...

The Cutting Edge chassis is made from 4" .120-wall tubing for the frame rails with a birdcage of 3/4-inch tubing used throughout. Look close, and you can see how the inboard coilover shocks are fitted to the frame.

Every car Cutting Edge sells...

Every car Cutting Edge sells starts in Jim Riddell's frame jig. Jim does nearly all the welding for CER, from chassis construction to prototype design work.

One of the beefy sections...

One of the beefy sections of the CER chassis is found behind the dropped footboxes. Steel plate (3/16" or .188" thick) is used not only for added strength, but safety, too. Mounting holes for the roll cage can be seen on the top crossbar.

One of the most unique aspects...

One of the most unique aspects of the CER chassis is due to Jim Riddell's history with racing midgets and sprint cars. The stout front crossmember design looks like they could have been borrowed from a race car, or at least a high-end street rod.

Here's another roadster ready...

Here's another roadster ready to leave Cutting Edge Replicas. For $27,950 you get most of what you see here (sans the wheels and tires and the roll cage) and a chance to experience Cutting Edge's philosophy of "Replication With Innovation."

You've heard about a company...

You've heard about a company standing behind their product? Cutting Edge's Jim Riddell proves how strong and rigid their hoods are by standing in the middle of it.